If anybody need help in EAGLE, ask me in this POST !

[CMOS]

pic18f4620 eagle library

Many people seek help in Eagle's ability to print a NEGATIVE (not mirror or image) without third party software?

Is that possible SyNTaXer ?
regards
Sarma

Use PS_INVERTED format in CAM Processor. It will produce inverted postscript output.

 

[me_guitarist]

download lbr of eagle 4.14

Anyone aware SMD components legend in Eagle printed on the solder pad?
Can this still be solderer?

 

[M!k]

miter ulp

Anyone aware SMD components legend in Eagle printed on the solder pad?
Can this still be solderer?

No problem as your board house will remove them. They'll never print on the pads.

 

[me_guitarist]

eagle change multiple rect to polygon

Anyone aware SMD components legend in Eagle printed on the solder pad?
Can this still be solderer?

No problem as your board house will remove them. They'll never print on the pads.

Thanks M!K.
If its 100 or more components there will be a lot of works.

 

[me_guitarist]

eagle cad-pcb 4.14light-(full library)

Anybody know how to import .dwg or .dxf board layout into Eagle?

I had a difficult to draw board pattern with Eagle.

 

[viks]

pic18f eagle lib

How do I use DIP socket.
I need to use 28pin DIP socket for my PIC processor.

I see DIL28-3 in ic-package, is that what I use ??

I am very new to PCB design, this is my first time.
Thanks

 

[M!k]

db9 library in eagle

which PIC exactly do you want to use?

 

[darling67]

eagle library download+rj11

you can draw a black box to replace the sub-circuit and connect it to the main drawing.

 

[viks]

how do i get the gbr file from eagle

I am using PIC24HJ128GP502 SPDIP package.

I do not want to solder chip itself, I want to use socket. I know it might be really stupid question but because this is my first PCB ever, so I have no idea.

Should I just select DIL28-3 in ic-package ??

 

[M!k]

eagle right menu bar

Concerning the layout it makes no difference to solder in a socket. The footprint is the same. The mechanical dimensions are a little bit bigger for a socket than a chip without socket, but this can be neglected.
Btw. I'd recommend precision sockets which are a little bit more expensive.

If you look at the datasheet of your PIC on page 326 you'll find that the DIL package has a 300 mil body. So you've to use the DIL28-3 device. This will work.

To complicate things: to draw a perfect schematic you'll have to build a library containing your device. That means there's a symbol of the chip for the schematic and a package for the board.
A specific device means that there's a relationship between the pins of the symbol and the pads of the device.
A good starting basis is this library for PIC24:
**broken link removed**
Unfortunately it doesn't contain your PIC, but can (easily) be extended.
This library already contains a DIP24-3 package.

 

[ehico16]

eagle cad polygon dimension layer

how to increase track in eagle pcb

 

[M!k]

eagle cad ic vcc

how to increase track in eagle pcb

I've already explained it here:
Any problems?

 

[JQL]

eagle cad diagonal thermals

Anybody know how to rotate the Hatch Polygon to 45°in Eagle PCB ?
Sorry my poor English.

Thanks for reply.

 

[maheshkuruganti]

cadsoft eagle serial db9

You have to set the Endpoints of your Polygon at an angle instead of a Rectangle.

Here is an example.
Hope it helps.

 

[JQL]

eagle pcb hatch view

maheshkuruganti
Thank you for your reply.

But, I need to rotate the Hatch trace (Vertical lines and Horizontal lines) of Polygon to a angle (45°).
Sorry my English again.

 

[kender]

eagle lem lib

how to output gerber in Eagle v5.30?

See the write-up and video here: http://www.ece101.com/2008/09/creating-gerber-files-in-eagle/

 

[PedjaZ]

cadsoft eagle copy brd to another brd

I need help with upl.
How to from schematic produce this txt?

//goal:
part: C1, pin +, partXY 1.5 3.5, pinXY 2.0 3.5
part: C1, pin -, partXY 1.5 3.5, pinXY 1.0 3.5
part: Q1, pin B, partXY 3.5 3.0, pinXY 3.0 3.0
part: Q1, pin C, partXY 3.5 3.0, pinXY 3.2 2.8
part: Q1, pin E, partXY 3.5 3.0, pinXY 3.2 3.2
...

I'm stuck with this:

 

[sakhan]

smd footprint solder side eagle

Hello
SyNTaXer,
Hope you will know.
I need to import an image in my layout editor.
How can i do that.

 

[jokstation]

multiple sheets eagle

Hello. I am creating my first design with eagle light edition. I have all signal routed, and now I want make the power with more density with poligons. But the poligon tool of eagle create poligons with only external dashed line.. How can I create solid poligons and print this?
Thanks!

 

[phorhas]

pic24hj128gp502 tutorial

Hi,

I want to drop a PCB outline from DXF into eagle. I managed to do that by converting the outline to .scr, but I cannot use it as one whole object, and I cannot move it as a whole with the coordination command line.

I know that I can use the GROUP function bu this allows me only to move it manually, but I need to locate it on a specific point in order to have absolute dimension and references

Please advise