Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TSMC18 MIX/RF ESD Problem

Status
Not open for further replies.
M

mydreamhouse

Advanced Member level 4
Joined
Oct 7, 2005
Messages
104
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Activity points
1,895
who can tell me the difference between ESD1DUMMY,ESD2DUMMY and ESD3DUMMY.
Thanks
 

These layers are only dummy layers and aren' t be generated to masks
You can look up the design rule and spice model pdf or lvs command file
 

as i know, the ESD3DUMMY is a tapeout layer, u should confirm with your CSV for mask logic operation.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top