Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Routing tracks in physical design

Status
Not open for further replies.

raj1435

Newbie level 5
Joined
Mar 19, 2015
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
60
Hi

Can any one expline me, where and how to check the number of available routing tracks for my particular standard cell.

thanks
 

biju4u90

Full Member level 3
Joined
Dec 10, 2014
Messages
172
Helped
3
Reputation
6
Reaction score
3
Trophy points
18
Activity points
1,437
The information about the layers used for routing are available in the technology lef file. Please go through .lef file.
You may see a commented section like this in the .lef file.

# [Layers Information of 7layer]
# #layer layerNmae pitch width spacing direction
# layer7 METTOP 1.68 0.84 0.84 H
# layer6 METG1 0.84 0.42 0.42 V
# layer5 MET5 0.28 0.14 0.14 H
# layer4 MET4 0.28 0.14 0.14 V
# layer3 MET3 0.28 0.14 0.14 H
# layer2 MET2 0.28 0.14 0.14 V
# layer1 MET1 0.28 0.14 0.14 H
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top