Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The very old SDT(?) version of capture did allow bitmaps for part symbols. This did allow import/export of ascii symbol files using asterixes to draw the symbols in a very crude way, as you might in an internet post to a forum like this. The current version uses vector graphics, so I don't believe you can do that anymore.
Tim
Unless you have a copy of orcad you cannot do anything with an orcad capture file as it is a binary file.
If you do have a copy , you could make a schematic of a memory array for your own tests.
You can get an eval version with limited capability from the Cadence website.
**broken link removed**
Unless you have a copy of orcad you cannot do anything with an orcad capture file as it is a binary file.
If you do have a copy , you could make a schematic of a memory array for your own tests.
You can get an eval version with limited capability from the Cadence website.
**broken link removed**
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
