How to add a connection to bus ( Powerlogic ) ?

[david_lee]

Anybody know how to add a connection to the bus ? I use powerlogic v5
Remark,
Add a connection to wire is no problem
Thanks in advance
David

 

[mdwct]

Buses are used to consolidate a group of nets into one connection. This eliminates the potential clutter of many nets going from, or to, the same location in the design.

1.Click the Add Bus button.
2.Click to start the bus, click to add the corner and double-click to finish the shape.
Tip: To remove the corner you just placed, press Backspace. To cancel the bus placement, press Esc.

3.In the Add Bus dialog box, type a name for the bus in the Bus Name box.
If the bus is to be used for strictly memory or data arrays, select Bit Format in the Bus Type area. Otherwise, select Mixed Net.
Bit Format— The name of the bus must follow the bit format shown for arrayed connections.

Tip: [NN:NN] represents [LSB:MSB].

Mixed Nets— The name of the bus must be unique. Add the names of all subnets to the Bus Nets area. The mixed net bus can also contain bit format connections. To enter values for a range, double-click the Start and End cells.

4.Click OK.
5.Click to place the bus name.