Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Home made solar collector

Status
Not open for further replies.

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318
81_1251898063.jpg


This installation for water heating can be made all by yourself. Atmega8 and Bascom are used in the driver. The driver consists of two Dallas sensors 1 wire on two pins DS1820. You can change delta (difference of temperatures between the collector and boiler) and the system remembers the highest temperature of the boiler during operation of the pump. „Solar collector” can be made for example of an old window and ½ inch copper tube, tubing as well.

Elements used:
  • driver
  • collector:
    • 11m copper tube
    • plate
    • spray
    • boiler 100L with electric heater
    • central heating pump

This device can heat up 100L of water from 14 to 36 degrees Celsius. The position of the roof on which you install the construction have influence on the performance of the „solar collector”, but you can create and add a second panel as well.

84_1251898027.jpg

81_1251898063.jpg

94_1251898045.jpg

91_1251898084.jpg

81_1251898101.jpg


Link to original thread - kompletna instalacja kolektora slonecznego
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top