Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

hi i am trying to simulate invertor in s-edit of tanner......

Status
Not open for further replies.

Balasubramaniyam

Newbie level 3
Joined
Jan 22, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
hi i am trying to simulate invertor in s-edit of tanner......but while simulation, error occur which says NMOS model not defined .. how to fix it.??



ERROR SAYS::::::::

Opening simulation database "C:\Users\BALA\AppData\Local\Temp\Cell2.tsim"
Fatal Error : Missing MOSFET model definition for "NMOS25"
: Referenced by device(s):
: MNMOS_2_5v_1
Fatal Error : Missing MOSFET model definition for "PMOS25"
: Referenced by device(s):
: MPMOS_2_5v_1
 

like your progtram
how can i download free ?
the link is free at first but after registering they are asking for payment
can u turn to free ltspice there its easy
 

can anybody explain wat d error is? m beginner with tanner......
 

You have to include the model library file.
Follow these steps:
  • Go to setup-->Spice simulation
  • Select General on the left pane.Under Files and Directories on the right side,you will find an option called Library files.
  • Click on browse, select your model library file ( *lib) and then press OK.You need to add "tt" or "tm" at the end after including the library file. So finally that column will look like...
    ../../../Tanner EDA/Tanner Tools v14.1/Libraries/Models/Generic_025.lib tt

setup_simulation.JPG

Hope it helps. ;-)
 
Last edited:

Dear All,

I where I can get .lib file for tanner.
I am not having any library files with .lib extention..
but I am have some model files for nmos and pmos with .md extention..

I dont knw how to invoke library

any one can help me




You have to include the model library file.
Follow these steps:
  • Go to setup-->Spice simulation
  • Select General on the left pane.Under Files and Directories on the right side,you will find an option called Library files.
  • Click on browse, select your model library file ( *lib) and then press OK.You need to add "tt" or "tm" at the end after including the library file. So finally that column will look like...
    ../../../Tanner EDA/Tanner Tools v14.1/Libraries/Models/Generic_025.lib tt

View attachment 72394

Hope it helps. ;-)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top