Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The coil contacts will energize the relay. And other six are grouped in 3 + 3.
2 of them on each side will be short normally and will open and shorted to the other one when energized.
Your picture is too small i cant read. but the left most pins are the coil pins.
next to it, the 2nd pin on each side is a common which will be short to the last or 2nd last normally.
check with meter.
---------- Post added at 19:39 ---------- Previous post was at 19:37 ----------
The coil contacts will energize the relay. And other six are grouped in 3 + 3.
2 of them on each side will be short normally and will open and shorted to the other one when energized.
Your picture is too small i cant read. but the left most pins are the coil pins.
next to it, the 2nd pin on each side is a common which will be short to the last or 2nd last normally.
check with meter.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.