Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Connection of Protective Earth in EVs

FreshmanNewbie

Full Member level 6
Joined
May 10, 2020
Messages
389
Helped
0
Reputation
0
Reaction score
2
Trophy points
18
Activity points
3,875
I am reading about the Electric Vehicle and their charging.

I went through this link - J1772, where the connector image is displayed.

The connector has a PE terminal.

Going through a lot of material and links, I read that the Protective Earth is connected to a earth rod on the charging station side.

  1. So, this earth rod will be connected to the metal case of the charging box also, right?
On the vehicle side, where does this Protective Earth get connected to? 2. Will this protective earth be connected to the Chassis of the car?

  1. Is the purpose of this PE just similar to the Earth for other general electrical appliances?
enter image description here
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top