Sakr
Member level 2
- Joined
- Jul 9, 2005
- Messages
- 43
- Helped
- 11
- Reputation
- 22
- Reaction score
- 5
- Trophy points
- 1,288
- Location
- Cairo, Egypt
- Activity points
- 1,533
I have made two different parts, and I have identified the supply pins in “supply and NC” tab in the “pin mapping window” of the “pin editor” of the “Library Manager”. For the first part I used “3.3V” and in the second one I used “VDD33”. The problem arises when I want to connect those two pins. As the supply pins doesn’t appear in the symbol, I created two nets with two labels “3.3V” and “VDD33” and I want to connect the together. I use DxDesigner for schematic capture.
Of course there is an easy solution by renaming one of the pins, but is there any work around to connect the two pins without altering the naming of the pins.
Best regards
Of course there is an easy solution by renaming one of the pins, but is there any work around to connect the two pins without altering the naming of the pins.
Best regards