Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

calibre postsimulationof PEX netlist

Status
Not open for further replies.

lhlbluesky

Banned
Joined
Mar 30, 2007
Messages
558
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Location
china
Activity points
0
calibre postsimulation

i extracted the PEX netlist (called A.pex.netlist), and how to do layout postsimulation with this PEX netlist?

if i use PEX netlist to replace the relative part of presimulation netlist, then how to do layout postsimulation with this PEX netlist?

if i use 'spectre input.scs' in terminal, then how to observe the waveform results (current or voltage waveforms), is results browser ok? or any other ways? should i use some related waveform observe tools? pls help me. thanks all.
 

sudheerkm

Member level 3
Joined
Jul 8, 2009
Messages
54
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,288
Location
india
Activity points
1,511
Re: calibre postsimulation

ok i donot know which tools u have

suppose u have eldo....
umay have the old silmulation files without pex

add vsources and output commands from those file(can be obtained from ur schematic editor output files)

and run eldo from command line.....
u cn view output
on ezwave or xelga

if u have cadence
things are easy goto hierarcy editor change the views
and run(but for that u should configure calibre from virtuoso
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top