Calibre PEX error UMC65nm

[lachuns123]

I came across an error in PEX.
In LPE .tec file path to lvs rule file is given with Include directive.In LVS Rule file #DEFINE PEXRUN is uncommented for pexrun. Error encountered on conile .tec file
ERROR PEX5 in line 2762 in .tec file.
capacitance or resistance extraction layer not properly configured in CONNECT operation:ME9_C
Please help to solve the error

 

[im_pam]

@lachuns123 ARE YOU ABLE TO SOLVE THIS PROBLEM. IF YES THEN PLEASE HELP ME WITH THIS

 

[aaksu]

I encountered a similar problem with PEX extraction using the UMC65 library. I resolved it by modifying the layer definitions in the LVS file according to the .tec file (1P8M1T0F in my case). After this change, it worked.

 

[im_pam]

@aaksu yes i have also resolved the problem,
if your XRC file is of 1P8M1T0F then uncomment "define top metal _me8 and if XRC file file is of 1P10M1T0F, then uncomment "define top metal _me10, in LVS file.. your problem will be solved.