Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

the coplanar waveguide simulation in HFSS

Status
Not open for further replies.
J

jayleung

Member level 5
Joined
Nov 29, 2005
Messages
82
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,962
Hi, I have a simple question about the coplanar waveguide simulation in HFSS. How do I define the "port" for a non-ground CPW?

And in reality, how can I connect the coaxial cable to the CPW? Can I connect the inner conductor to the central strip and the outer conductor to one side of the side ground?
 

jayleung said:
Hi, I have a simple question about the coplanar waveguide simulation in HFSS. How do I define the "port" for a non-ground CPW?
Click to expand...

There is JPEG-drawing, with cpw-port for HFSS model, at the next topic:


And in reality, how can I connect the coaxial cable to the CPW? Can I connect the inner conductor to the central strip and the outer conductor to one side of the side ground?
Click to expand...
You need to connect Outer conductors to both sides of the cpw-ground.
 

    J

    jayleung

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top