Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

the coplanar waveguide simulation in HFSS

Status
Not open for further replies.

jayleung

Member level 5
Joined
Nov 29, 2005
Messages
82
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,962
Hi, I have a simple question about the coplanar waveguide simulation in HFSS. How do I define the "port" for a non-ground CPW?

And in reality, how can I connect the coaxial cable to the CPW? Can I connect the inner conductor to the central strip and the outer conductor to one side of the side ground?
 

borich_03

Full Member level 2
Joined
Oct 7, 2003
Messages
142
Helped
20
Reputation
42
Reaction score
6
Trophy points
1,298
Activity points
1,148
jayleung said:
Hi, I have a simple question about the coplanar waveguide simulation in HFSS. How do I define the "port" for a non-ground CPW?

There is JPEG-drawing, with cpw-port for HFSS model, at the next topic:
&highlight=

And in reality, how can I connect the coaxial cable to the CPW? Can I connect the inner conductor to the central strip and the outer conductor to one side of the side ground?
You need to connect Outer conductors to both sides of the cpw-ground.
 

    jayleung

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top