soloktanjung
Full Member level 6
Hi,
I want to know how much wire/net delay contribute in my critical paths, so I use report_timing -nets command in PrimeTime but there is no value for each net as shown below. Does anyone know how to know the exact net delay?
Thanks in advance.
I want to know how much wire/net delay contribute in my critical paths, so I use report_timing -nets command in PrimeTime but there is no value for each net as shown below. Does anyone know how to know the exact net delay?
Thanks in advance.
Code:
Point Fanout Cap Trans Incr Path
--------------------------------------------------------------------------------------------------------------------------------------------------
clock network delay (ideal) 1.00 1.00
input external delay 0.50 1.50 r
rst_i (in) 0.05 0.02 & 1.52 r
rst_i (net) 1 0.01
FE_OFC2540_rst_i/Z (HS45_LS_IVX35) 0.02 0.04 & 1.56 f
[B] FE_OFN2540_rst_i (net) 2 0.01
[/B] FE_OFN2540_rst_i__L1_I0/Z (HS45_LS_CNBFX59) 0.02 0.05 & 1.61 f
[B] FE_OFN2540_rst_i__L1_N0 (net) 2 0.01
[/B] FE_OFN2540_rst_i__L2_I0/Z (HS45_LS_CNBFX59) 0.02 0.05 & 1.65 f
[B] FE_OFN2540_rst_i__L2_N0 (net) 1 0.00
[/B] FE_OFN2540_rst_i__L3_I0/Z (HS45_LS_CNBFX59) 0.02 0.04 & 1.70 f
FE_OFN2540_rst_i__L3_N0 (net) 1 0.00
FE_OFN2540_rst_i__L4_I0/Z (HS45_LS_CNBFX59) 0.02 0.05 & 1.74 f
FE_OFN2540_rst_i__L4_N0 (net) 1 0.00
FE_OFN2540_rst_i__L5_I0/Z (HS45_LS_CNBFX59) 0.02 0.04 & 1.79 f
FE_OFN2540_rst_i__L5_N0 (net) 1 0.00
FE_OFN2540_rst_i__L6_I0/Z (HS45_LS_CNBFX59) 0.02 0.04 & 1.83 f