tony_lth
Advanced Member level 5
Hi, Gurus,
I found in the TI AWR2243 pdf, it says in 2.3.1:
I am curious how to determine 86 element?
The radar antenna layout as the picture, the upper is 16 RX antennas, the lower is 12 TX antennas. Each IC has 3TX and 4RX.
Best,
Tony Liu
And I found the elevation 4 elements array are not spaced equevalently.
So how to determine the elevation resolution is 18deg?
In Fig6, it demos the arrays.
And in Fig7, it present the simulate results.
I wonder how to get Fig7 results in matlab? how to program?
I found in the TI AWR2243 pdf, it says in 2.3.1:
86 element virtual array – enabling 1.4 degree angular resolution |
4 element virtual array – enabling 18 degree angular resolution |
The radar antenna layout as the picture, the upper is 16 RX antennas, the lower is 12 TX antennas. Each IC has 3TX and 4RX.
Best,
Tony Liu
--- Updated ---
And I found the elevation 4 elements array are not spaced equevalently.
So how to determine the elevation resolution is 18deg?
--- Updated ---
In Fig6, it demos the arrays.
And in Fig7, it present the simulate results.
I wonder how to get Fig7 results in matlab? how to program?
Attachments
Last edited: