ntropy
Junior Member level 1
I need help displaying the duty cycle of an incoming 1 MHz signal. The output number will be displayed as a hex value/ascii number. Please help!!
For back information, I'm using a Spartan 601 starter kit board. With the use of the provided base reference design interface there is a second tab that has a user defined section. The user is allow to select control bits (8 bits). The goal is to be able to select control bit 0000 0001 and select send and have the desired duty cycle channel to be displayed. The goal is to have ten channels that I can monitor the duty cycle.
For back information, I'm using a Spartan 601 starter kit board. With the use of the provided base reference design interface there is a second tab that has a user defined section. The user is allow to select control bits (8 bits). The goal is to be able to select control bit 0000 0001 and select send and have the desired duty cycle channel to be displayed. The goal is to have ten channels that I can monitor the duty cycle.