Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB hubs configuration.

Status
Not open for further replies.
S

Sunny55

Full Member level 3
Full Member level 3
Joined
Sep 15, 2012
Messages
159
Helped
12
Reputation
24
Reaction score
12
Trophy points
1,298
Visit site
Activity points
2,404
Hi, i have a question in mind.Are 4 port USB hubs using a current divider circuit to control the input current to the connected devices? Then it can be said that all the ports are connected in parallel as voltage is same( around 5VDC) but current is different ?

Please correct me if i am wrong.

Thanks.
 

Can anyone tell me if this is correct or wrong please?

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top