sony str-db804 display "protect"

nnaveli · Aug 18, 2013

this amp displays protect,all output transistors are ok and their drivers allright.i tried to clear the eeprom by pressing standby button for few seconds and pressing enter button,it says eeprom cleared but the fault persist.pls i need a method for temporar protect defeat cause i have nodrawing.:?:

pradeep.g.belchada · Aug 19, 2013

Check for the fuses and ouput voltage of smps.

nnaveli · Aug 22, 2013

pradeep.g.belchada this set has no smps,is 2 mains transformers one for stdby and the other for +B and -B and other suplies.if the fuse was dead it wont go to stdby if for the bib transf- it wont light the florecent.pls i need a schem.but when 8/4 ohm selector switch wires are removed its ok,but no sound.:-|

pradeep.g.belchada · Aug 22, 2013

can u post the closeup photo of your amplifier i meant only pcb assembly(cover removed)

sony str-db804 display "protect"

nnaveli

Member level 2

pradeep.g.belchada

Full Member level 6

nnaveli

Member level 2

pradeep.g.belchada

Full Member level 6

Similar threads

sony str-db804 display "protect"

nnaveli

Member level 2

pradeep.g.belchada

Full Member level 6

nnaveli

Member level 2

pradeep.g.belchada

Full Member level 6

Similar threads

Privacy & Transparency

Privacy & Transparency