Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sony kv14r20c no start

Status
Not open for further replies.
M

marco antonio

Member level 3
Joined
Jul 28, 2004
Messages
66
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Peru
Activity points
433
Initillay the two transitors of the power supply were shorted so the HOT. I replaced and now I got the 115v and 12v and the stanby 5v however when I switch on the tv seems to start but inmediatly turns off. I noted that no 9v nor 5v works fine.
Any suggestion,please.
rgds
marco antonio
 

please check the high voltage horizontal out put section, may be high volt. transistor is leakage

maybe help
 

The problem was in the jungle ic. i chaged it and tv is working fine.
thanks
marco antonio
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top