Dear adamhenry and kabeer02
pls kindly assist me to get this project working. I observed that when the inverter comes on , it only stay for 10-15 seconds them it gos off and the low battery led comes on. how can i solve this problem and also the feedback is still not working for me.
As siktec
"Dear adamhenry and kabeer02
pls kindly assist me to get this project working. I observed that when the inverter comes on , it only stay for 10-15 seconds then it gos off and the low battery led comes on. how can i solve this problem and also the feedback is still not working for me."
I've tried to implement this technique but when it place transformer to step up inverter voltage ,voltage drops 4v on pri and 80v on sec.But it worked fine without transformer but LCL filter ..Can anybody give me solution for this problem
In a new thread I will publish the whole design at the top of this section.
- - - Updated - - -
For now I want to know how many members are interested and ready for giving me official thanks, My desighn has a complete trouble shooting guide with schematics and BOM.
@ naseerak,
We are all interested in the design or any other similar one. Accept my official 1000 thanks and appreciation in anticipation of your post.
For a 24v system, use 32k and 220k , and don't bother using the lm324 use a current transformer instead , I will upload the Proteus schematic or pdf of the circuit, the feedback is working fine, but use a 5v transformer instead, but I use opto coupler in feedback and it is working..