Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Req]Renesas OutPut and Code Samples

Status
Not open for further replies.
C

Cortex

Full Member level 3
Full Member level 3
Joined
Mar 26, 2005
Messages
182
Helped
12
Reputation
24
Reaction score
4
Trophy points
1,298
Location
Morocco
Activity points
2,733
r16c renesas

Hello all
i'am using a Renesas R16C/Tiny for a project.

Now i power the Mcu with 5V. and the output are 5v.
If i power it with 3.3 V , can i still controle TTL device ??


Also can someone post some code samples for I2C Communication and RS232 ??


Thank you in advance
 

no the outputs will be 3.3v
you have two solutions
1) use level converters
2)use TTl with vOH near 3.3 v
 

    C

    Cortex

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top