Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Removal of WLAST, RLAST in AXI

Status
Not open for further replies.

fragnen

Full Member level 3
Full Member level 3
Joined
Apr 3, 2019
Messages
168
Helped
0
Reputation
0
Reaction score
1
Trophy points
18
Activity points
1,229
Why cannot the AXI specification removes the WLAST and RLAST signals as the AWLEN and ARLEN can give the indication of the last transfer in an AXI write or read burst respectively? So there is no need for WLAST and RLAST as the last transfer can be derived from AWLEN and ARLEN.
 

TrickyDicky

Advanced Member level 7
Advanced Member level 7
Joined
Jun 7, 2010
Messages
7,109
Helped
2,080
Reputation
4,179
Reaction score
2,045
Trophy points
1,393
Activity points
39,763
Having counters in all parts of the logic may be rather wasteful. Some parts may only be interested in a last signal. A single bit is cheaper than comparing a counter.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top