Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] PSpice A/D Floating Node Problem

Status
Not open for further replies.

erudite450

Newbie level 4
Joined
Jun 6, 2020
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
41
I simulated the circuit in example 2.2 of Muhammad Rashid's Spice for Power Electronics and Electric Power. The Schematics file ran without any problems but the circuit description on PSpice A/D is throwing up floating circuit error. Help needed.
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
46,758
Helped
13,880
Reputation
28,008
Reaction score
12,519
Trophy points
1,393
Location
Bochum, Germany
Activity points
272,893
Verify that you are using the right GND symbol at node 0. PSpice has different GND symbols, not all are connected to actual circuit ground. In case of doubt review the generated netlist.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search


Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


×
Top