Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Prototype PCB manufacturers in OZ

Status
Not open for further replies.

kkeeley

Member level 3
Joined
Jul 29, 2009
Messages
59
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Australia
Activity points
2,833
Hi All,

I have been working on a couple of boards for a project of mine, and due to the complex nature of the project I don't see how I could make good enough PCB's at home. The boards are multilayered and have 12mil tracks on average, with several hunderd holes in each PCB.

So my question is, what are some of the better/cheaper places to get prototype pcbs made in OZ, or at least shipped to OZ?

My biggest board is about 300mm x 150mm and most of the others are 230mm x 100mm. I have seen online that these sizes boards could cost me over $200 each, and that seams rather high for a one of board.

Thanks
Kenneth.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top