Zer0
Junior Member level 1
mcs8051.dll
Hi,
I`ve a problem when i try to use Proteus as a virtual In Circuit Emulator with Keil as a debugger
Normally,When i press the "Start/Stop debug session" button in Keil ,the Circuit in Proteus has to power-on. But when i do this an error message appear from proteus, as follows:
{
SIMULATION LOG
==============
Design: C:\Program Files\Labcenter Electronics\Proteus 6 Professional\BIN\MyProjects\LCD1.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 02/09/03
Modified: 07/09/03
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [7F2EA83C]...
Animation started sucessfully...
PROSPICE Release 6.1 SP2 (C) Labcenter Electronics 1993-2002.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Net VDD taken as alias for VCC
Net VSS taken as alias for GND
Reading SPICE models...
Building circuit...
Instantiating SPICE models...
[U1] Read total of 185 bytes from file 'LCD_TEST022.hex'.
PROSPICE - Internal Exception: access violation in module 'MCS8051.DLL'.
Real Time Simulation FAILED.
}
Why is there an access violation in the module 'MCS8051.DLL' ?
Can anyone suggest a solution?
Thanks in advance
Hi,
I`ve a problem when i try to use Proteus as a virtual In Circuit Emulator with Keil as a debugger
Normally,When i press the "Start/Stop debug session" button in Keil ,the Circuit in Proteus has to power-on. But when i do this an error message appear from proteus, as follows:
{
SIMULATION LOG
==============
Design: C:\Program Files\Labcenter Electronics\Proteus 6 Professional\BIN\MyProjects\LCD1.DSN
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 02/09/03
Modified: 07/09/03
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [7F2EA83C]...
Animation started sucessfully...
PROSPICE Release 6.1 SP2 (C) Labcenter Electronics 1993-2002.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Net VDD taken as alias for VCC
Net VSS taken as alias for GND
Reading SPICE models...
Building circuit...
Instantiating SPICE models...
[U1] Read total of 185 bytes from file 'LCD_TEST022.hex'.
PROSPICE - Internal Exception: access violation in module 'MCS8051.DLL'.
Real Time Simulation FAILED.
}
Why is there an access violation in the module 'MCS8051.DLL' ?
Can anyone suggest a solution?
Thanks in advance