Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Programming a LATTICE M4A5 plc Chip

Status
Not open for further replies.
V

Voltz

Newbie level 1
Joined
Dec 10, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Please let me know wat are the pins used for programing a lattice M4A5 128 plc chip. i have an ALL-100 programmer with a 48 dip socket. i understand that i can use an adapter but i want to work on pcb's with the chip already soldered. the pcb has a 6 pin programming input socket. can the ALL-100 programmer be used to read and modify progs as well...??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top