danilo
Newbie level 1
Hi
I mada a synthesys with design Compiler and the process ends without error.
I saved the netlist in verilog format.
I try to read this netlist with Tetramax, but the bus / wire contention ability check fails due to a wire gate.
The error is
Error: Wire gate (997) failed contention ability check for drivers 994 and 996. (Z3-1)
Any suggestion?
Thanks a lot in advance
I mada a synthesys with design Compiler and the process ends without error.
I saved the netlist in verilog format.
I try to read this netlist with Tetramax, but the bus / wire contention ability check fails due to a wire gate.
The error is
Error: Wire gate (997) failed contention ability check for drivers 994 and 996. (Z3-1)
Any suggestion?
Thanks a lot in advance