Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Printing an Eagle PCB in negative mode

Status
Not open for further replies.

boncker

Member level 2
Joined
Dec 9, 2006
Messages
51
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Location
Brazil
Activity points
1,610
eagle print pcb

I'm finishing a PCB using Eagle and I couldn't find a way to print the board in negative mode, to use a fotograph paint to make the PCB.

Is there any way to do this in Eagle?
 

zia.roghani

Member level 1
Joined
Sep 13, 2006
Messages
37
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,514
eagle pcb negative

in comand area just write
print
then u can print from eagle
 

bhatt_ajit

Newbie level 1
Joined
Jun 5, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,285
eagle pcb print

1. Go to file Menu > export>image.
2. Click clipboard box and press ok
3. open Microsoft windows Paint and press paste
4. now image will be available in MSPaint.
5. Now select full image and image menu/invert colors.
6. save the image
6. Good for documentation ( not to scale)
 

mz_fadhli

Junior Member level 3
Joined
Jan 26, 2008
Messages
29
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,434
make negative eagle pcb

1. Go to file Menu > export>image.
2. Click clipboard box and press ok
3. open Microsoft windows Paint and press paste
4. now image will be available in MSPaint.
5. Now select full image and image menu/invert colors.
6. save the image
6. Good for documentation ( not to scale)
it is not suggested for you guys to invert the PCB like that because the resolution will lessen. Thus,you won't have the perfect print for PCB. I have the perfect solution. Plus, the scale is maintained. Give me a couple of days to post it.:D

from this



to this

[/quote]
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top