Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pointers on RF PCB design

Status
Not open for further replies.
hrkhari

hrkhari

Full Member level 4
Joined
Mar 4, 2004
Messages
223
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Activity points
2,250
rf pcb design

Hai Folks:

I tested my mixer and QVCO using wafer probing, but whenever I mount it on the PCB (duriod), with off chip balun, the device fails. Can you give me some pointers on RF PCB design and highlight any dedicated steps to test each of the block. Any reading materials would also be appreciated. Thanks in advance

RGds
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top