Manjuhb
Newbie level 6
Hi All,
I have connected the MCLR pin of PIC16F877A to VCC through 10K ohm resistor, but when I turn on the MCU the LCD is not displaying the second line until I touch the MCLR pin to GND point through a wire if once I touch then it will work properly until net power though main. Can any one tell me what is the problem please.
Thanks,
Manjunath H B
I have connected the MCLR pin of PIC16F877A to VCC through 10K ohm resistor, but when I turn on the MCU the LCD is not displaying the second line until I touch the MCLR pin to GND point through a wire if once I touch then it will work properly until net power though main. Can any one tell me what is the problem please.
Thanks,
Manjunath H B