Oct 12, 2011 #1 M murali_dece Member level 5 Joined Jul 21, 2004 Messages 83 Helped 26 Reputation 52 Reaction score 25 Trophy points 1,298 Location india Activity points 549 Dear PCB123 users I tried to generate the foot print for the following footprint attached, but all ways i am getting distorted pattern like Please help to generate correct pattern. I tried number of times Attachments prqp0080gb_a.pdf 27.3 KB · Views: 54
Dear PCB123 users I tried to generate the foot print for the following footprint attached, but all ways i am getting distorted pattern like Please help to generate correct pattern. I tried number of times
Oct 12, 2011 #2 M marce Advanced Member level 5 Joined Feb 23, 2010 Messages 2,079 Helped 627 Reputation 1,256 Reaction score 633 Trophy points 1,393 Location UNITED KINGDOM Activity points 14,402 1. Look up IPC-7351 and "The CAD libaray of the future" 2. Ditch imperial and use metric, most parts are now hard metric, including this one. The top row of pins is offset, can you provide a screen shot of the pin data entry please.
1. Look up IPC-7351 and "The CAD libaray of the future" 2. Ditch imperial and use metric, most parts are now hard metric, including this one. The top row of pins is offset, can you provide a screen shot of the pin data entry please.
Oct 12, 2011 #3 M murali_dece Member level 5 Joined Jul 21, 2004 Messages 83 Helped 26 Reputation 52 Reaction score 25 Trophy points 1,298 Location india Activity points 549 here is pin parameters window other parameters are: pin pitch:0.8mm pin diameter:0.35mm foot length: 0.6mm Land: length extent:22mm width extent:17mm pitch length:1.65mm pitch width:0.35mm I tried in all possible ways but no improvement in drift
here is pin parameters window other parameters are: pin pitch:0.8mm pin diameter:0.35mm foot length: 0.6mm Land: length extent:22mm width extent:17mm pitch length:1.65mm pitch width:0.35mm I tried in all possible ways but no improvement in drift