Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] orcad/My Off page connectors are always floating

Status
Not open for further replies.

Basba

Newbie level 2
Newbie level 2
Joined
Dec 25, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
15
Hi everyone!

First, I would like to wish you beautifull celebrations...

As a Orcad beginner, I have some Orcad beginner problems.

I try to create off page connectors but they still remaining floating when I want to execute pSpice.

I create my scheme and I follow the instruction of this tutorial **broken link removed**.

My scheme which is quiet simple seems like that:


Schemas.png

The errors that I have sound like this :

**** INCLUDING SCHEMATIC1.net ****
* source FLOATINGNODE
V_V1 A B
+SIN 0 1 10 0 0 0
R_R1 B A 1k TC=0,0

**** RESUMING bias.cir ****
.END

ERROR -- Node A is floating
ERROR -- Node B is floating


I need your help to understand the origin of these errors and of course to solve them.

Sincerly,

AA
 

The off-page connectors are working as can be seen from netlist.
The issue is with ground. You should not give any net name to ground net. It is expected to be "0".
Try removing B connector from both pages. This should resolve the error.
 
  • Like
Reactions: Basba

    Basba

    Points: 2
    Helpful Answer Positive Rating
Thank you a lot Mvaseem,

Your solution works and rocks!

Sincerly,

AA
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top