Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help with operating EP-2006 PCB Prototype machine

Status
Not open for further replies.
H

hussain_kiet

Full Member level 5
Joined
Mar 15, 2007
Messages
260
Helped
45
Reputation
90
Reaction score
28
Trophy points
1,308
Location
Karachi, Pakistan
Activity points
2,802
we m using orcad for pcb designig
in our university we have the machine
EP-2006 PCB PROTOTYPE MACHINE
Click to expand...
from EVERPRECISION

but we are facing a problem
the machine do all the things fine but it is doing opposite of what we want
means it erase the copper where we dun want and doen't erase the copper where we do want the copper to be erased...

means if i have rtouted a track on any particular area it will erase the copper from that area...:cry:

can anybody help me regarding this
thanx in advance...!!!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top