Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need explanation of the term VCO dither

Status
Not open for further replies.
AdvaRes

AdvaRes

Advanced Member level 4
Joined
Feb 14, 2008
Messages
1,163
Helped
113
Reputation
220
Reaction score
51
Trophy points
1,328
Location
At home
Activity points
7,442
Dither

Hi members,
I was reading a paper when I come across these words "VCO dither"
Could someone explain what is dither ? Does mean noise or it is another thing ?
 

Re: Dither

I have never heard of VCO dither. Dither is noise satisfying some criteria (Bandlimited CF / periodical zeros in CF., etc) that decorrelates the input and the noise., so that even though overall noise floor increases, the tones are reduced and the noise is evenly spread out. Dither is used in the SD modulator in the feedback divider to reduce the fractional spur levels. Probably this is what is indicated as VCO dither..., just guessing.
 

    AdvaRes

    AdvaRes

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top