My LG TV would take hours to turn on. The red light would just flicker, but nada. I read where this was most likely due to bad capacitors. I opened the set up and sure enough there were several obvious faulty ones there. I purchased the exact replacement, soldered them…and now my TV will not turn on at all. I checked to make sure that everything was connected, etc. Anyone have an idea what could be causing this? Thanks.
If it is radial capacitor...it will be electrolyte type...I think.....do two thing first check the voltage rating of capacitor that you replaced and present on board and second is check the polarity of the capacitor that you are mounted....so check that any unwanted solder get dropeed on your board on not....