Digilent told me that I should format the mem stick to FAT (I did but it didn't work either). They also told me that the .bit file must be compatible with the FPGA, otherwise the board rejects it... well I think the .bit file is compatible,
..anyway at this moment I'm totally hopeless.... I'm not even sure the JTAG programmer I will receive in about 20 days (hopely) will work....
Even if the JTAG or stick will at last work.. well I will anyway find myself with a board which is not the board I paid for... I have thought about this, I need a fast port to store on a external device the frame grabbed from HDMI input port to realize my portable HDMI recorder... the USB Adept port would have been perfect for that... but now that it is gone?
If I understand correctly mrflibble has the same board and he managed to make it work, maybe he can upload his bit file which works for sure so that you can try it too and at least you will be sure that the bit part is correct and search for another cause if it still doesn't work.
The file you should be putting on that stick should have this md5 checksum:
912b77143bb9111e53248b32d4f72f2e test.bit
Why my USB download cable was shipped with the wrong connectors??
... my next step is looking for a guide that explains how to program this beast with the JTAG cable...
jtgcfg init -d atlys
Initializing scan chain...
...
Found 1 device(s):
Device 0: XC6SLX45
djtgcfg init -d nexys2
...
Found 2 device(s):
Device 0: XC3S1200E
Device 1: XCF04S
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?