mizk_electro
Newbie level 4
pic-mcp-usb diagram
I got schematic & firmware (posted in www.sonsivri.com). I built it and the USB board request the driver and being installed succesfully.
But it cannot detect PIC MCU.Maybe somebody can figure out what happen?
Please refer to URL below for schematic & firmware.
**broken link removed**
Added after 37 minutes:
Whoknows,
Is it PROVEN WORKING?
I already built this circuit (GTP-USB).I built it using my own PCB(using eagle).
I load the 18F2550 with the hex that come together.
I also use winpic800 latest version(3.58).
To use winpic800, I just double clik the icon of winpic800 but said some error(see pic below) or any suggestion? Or need to be install but how ?
FYI, I use winpic800 with JDM2 Programmer (serial port) with no problem.
Or how you config the setting of winpic800. Can you post here the setting which proven working?
Thanks in advance for all kind of help/guidances
I got schematic & firmware (posted in www.sonsivri.com). I built it and the USB board request the driver and being installed succesfully.
But it cannot detect PIC MCU.Maybe somebody can figure out what happen?
Please refer to URL below for schematic & firmware.
**broken link removed**
Added after 37 minutes:
whoknows said:Here is another PIC Usb2 programmer.
Just check the following links or download attached file.
There is Eagle4.11 Sch and Brd for the project and translated
Forum file.
h**p://miarroba.com/foros/ver.php?foroid=59905&temaid=3372845
h**p://siscobf.webcindario.com/winpic800.htm
h**p://siscobf.webcindario.com/descargas/WinPic800.zip
Whoknows,
Is it PROVEN WORKING?
I already built this circuit (GTP-USB).I built it using my own PCB(using eagle).
I load the 18F2550 with the hex that come together.
I also use winpic800 latest version(3.58).
To use winpic800, I just double clik the icon of winpic800 but said some error(see pic below) or any suggestion? Or need to be install but how ?
FYI, I use winpic800 with JDM2 Programmer (serial port) with no problem.
Or how you config the setting of winpic800. Can you post here the setting which proven working?
Thanks in advance for all kind of help/guidances