Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking USB PIC programmer with 2 I/O port and LCD

Status
Not open for further replies.
pic-mcp-usb diagram

I got schematic & firmware (posted in www.sonsivri.com). I built it and the USB board request the driver and being installed succesfully.

But it cannot detect PIC MCU.Maybe somebody can figure out what happen?

Please refer to URL below for schematic & firmware.

**broken link removed**

Added after 37 minutes:

whoknows said:
Here is another PIC Usb2 programmer.
Just check the following links or download attached file.
There is Eagle4.11 Sch and Brd for the project and translated
Forum file.

h**p://miarroba.com/foros/ver.php?foroid=59905&temaid=3372845

h**p://siscobf.webcindario.com/winpic800.htm

h**p://siscobf.webcindario.com/descargas/WinPic800.zip

Whoknows,

Is it PROVEN WORKING?

I already built this circuit (GTP-USB).I built it using my own PCB(using eagle).
I load the 18F2550 with the hex that come together.

I also use winpic800 latest version(3.58).

To use winpic800, I just double clik the icon of winpic800 but said some error(see pic below) or any suggestion? Or need to be install but how ?

FYI, I use winpic800 with JDM2 Programmer (serial port) with no problem.


Or how you config the setting of winpic800. Can you post here the setting which proven working?

Thanks in advance for all kind of help/guidances
 

usb pic programmer egypt

Sorry for misspelling...

I'm using winpic800 ver 3.58 .
 

gtp usb summer 2005 driver

i'd read some post later, think u hv to use the older ver of Winpic800, but dunno which ver....try find out and post it here plz
 

winpic 800 in eagle

I succesfull built USB-GTP Lite programmer ...

refer

**broken link removed**
 

winpic usb programmer

USB-GTP Lite programmer seem great.. i found the schematic at the website mizk_electro provided.. but i cant find the hex file for the 18f2550.. may i know where can i get it?? thanz a lot~..
 

pic800 programmer

mizk_electro said:
Sorry for misspelling...

I'm using winpic800 ver 3.58 .

I speak spanish, maybe i help you.

You necesary use Winpic 3.55 for work with the GTP - USB, this free version is called SUMMER. The hex come with this version of Winpic. The news version of Winpic not come with the hex.

Sisco built a new version called GTP - USB PLUS, is very good and programs a lot of Pics, DSPics, Atmel, etc. but is not free.

His new web page is:

**broken link removed**

Here is translate with google

**broken link removed**

And here the supported device

**broken link removed**

He sell the Pic programmed, the PCB, or the complete programmer ready to use, and the cost is very good and have good tecnical support.

Best Regards
 

usb io schematik

You can refer this link?
h**p://www.sonsivri.com/forum/showthread.php?s=bfc4c5ec662525ce871e0e2bd54303e1&t=1031&page=4&pp=15
Final, I think nobody can search a free firmware GTP_USB. !:DI
 

winpic800 usb downloader trial version

USB-GTP Lite programmer, this one is good? can i know where to get the firmware for tat? or anyone can upload it here? thankx....
 

win pic 800 3.5 circuits

ahmad_abdulghany said:
here you will find a good USB pic programmer :
h**p://www.olimex.com/dev/pic-mcp-usb.html

Hi,

Would you please uplaod the schematic for this programmer.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top