Yes, for sure.
There are signal names corresponds to the probe you have plugged into the Mictor connector. For example, if you are using probe A3, and connected probe labelled A3(7) as D7 in Mictor, A3(6) as D6 and so on, you can then select and add these signals to your work space on LA(Logic Analyzer) to analyze the waveform. Also, you may be able to group these signals as a parallel bus and even name it as you wish. On the trigger menu, you could set either of those signals as trigger. There are lot of options to set the type of trigger as well. You can define trigger on positive, negative edges, or either levels. Also, you can set group trigger based on multiple signal conditions, pattern, etc.
If you have difficulty in setting up the LA, please share the LA details, so that one could advice you to the need.