nzcanadian
Newbie level 2
attach multiple atx power supplies in series
Hi forum. I need a cheap PSU for an audio amplifier I am making. Anything around 50V-60V would be good. The amplifier will draw about 120W at most, therefore requiring 2.5A on average.
I would like your opinion on whether it is possible to link multiple ATX computer PSUs together in series to get this voltage, or if that will cause a massive short circuit situation :!:.
Also, if you have any other ideas for a cheap power supply fitting the above bill, please post!
Cheers guys (girls),
Dan
Hi forum. I need a cheap PSU for an audio amplifier I am making. Anything around 50V-60V would be good. The amplifier will draw about 120W at most, therefore requiring 2.5A on average.
I would like your opinion on whether it is possible to link multiple ATX computer PSUs together in series to get this voltage, or if that will cause a massive short circuit situation :!:.
Also, if you have any other ideas for a cheap power supply fitting the above bill, please post!
Cheers guys (girls),
Dan