is there any Example code for Microchip ENC28j60 ethernet controller Chip?

[Port Map]

Hi,

I want to use ENC28j60 chip to send data from PC to FPGA using TCP protocol.

Does any one know, Is there any example VHDL/Verilog or Microblaze code for this work?

I'll be so thankful for replies.

 

[amayilsamy]

https://www.geeetech.com/Documents/ENC28J60 Manual Source Code.pdf

https://www.open-electronics.org/low-cost-ethernet-shield-with-enc28j60/

I hope its helps you...

 

[thannara123]

I too like this type of projects
https://induino.blogspot.in/2012/07/induinox-user-guide-interfacing-with_5270.html

 

[mrflibble]

There is a reasonable library out there from microchip (can't believe I just said that), which you then would have to port to microblaze.

 

[Port Map]

Very thanks for your replies. I get the library.
Now,
Is that library ready to be used in Microblaze? or I should change it for use?

 

[thannara123]

Microchip ENC28J60 ethernet driver (MAC + PHY) program
may be helpful
**broken link removed**

 

[mrflibble]

I would be very much surprised if a microchip library worked as is on microblaze. So yes, you will have to make some changes. "Which ones?" I hear you ask in a predictable fashion. "Well, the required ones you are going to find about as part of your work" I then reply.

What you can do is grab a few ports of it floating around on the internet, then do a diff for some inspiration.

 

[Raja Balaji]

can anyone tell where can I find the verilog code for the same.. (I am using xc3s50)

thanks in advance

 

[mrflibble]

Fat chance of finding that. Better use a softcore mcu implementation.

 

[Raja Balaji]

My controller not only needs to do this function. It is just one of them. I think it would be less memory consuming if it is direct implementation using verilog. correct me if I am wrong.

will be easy to learn how it is implemented in softcore mcu and convert it to verilog?

I have a code for the same as C libraries (used for microcontroller). Is there a way to convert them to verilog?

my questions may be silly bcoz I am new to this and have very little idea about them.

 

[Ostar]

Hi,

I want to use ENC28j60 chip to send data from PC to FPGA using TCP protocol.

Does any one know, Is there any example VHDL/Verilog or Microblaze code for this work?

I'll be so thankful for replies.

Hey hi, I want to do the same just in reverse. I would like to use the ENC28j60 chip to send data from FPGA to PC using TCP protocol. I was wondering if you could help me out. I want to accomplish the procedure mentioned above using Verilog. Hope you can help me. Anyway, thanks in advance.