Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
If you want to Implement a master/target PCI core at 66mhz (with a PLDA PCI core), you must choose an altera acex (ie 1k100fc484) with -1 speed grade. In the case of the pci must be operate at 33mhz a -2 speed grade should be ok (do not use a -3 speed grade at 33mhz because it is too slow).
This informations depends also of the pci core selected. :wink:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.