Marmelado said:I want to integrate other designs in my design, i need only schematic
Thanks!
bunalmis said:Hello SyNTaXer,
Yes I need software for my CNC.
I draw a simple PCB using eagle 4.03. (Look in test.zip)
Bottom layer has orginal PCB lines and pads.
I convert this lines manualy and i drow for you, this lines at the top layer.
Manual convertion is diffucult and Outlines.ulp not good (my idea)
I need ulp program for this purpose.
Thanks.
indi2go said:If i work with V3.55 all things are right.
Now I have a look at V4.X and there happen some strange things.
When i make zooms or move some parts, some buttons disapear or
some layer are displayed wrong.
If I save the Board and open it again all thing are all right, but after
some movements....
(I work with Win2k Version)
Is there a known problem with displaydriver under win2k in Version 4.x??
How can I put my logo (graphic or picture) into the PCB?
pico said:Thank you MrAndy.
I have another question.
How can I make or connect sub-circuits in the same project. I can use multisheet to draw the circuits, but how can I connect them together (what connector or symbol to be use) and can I draw a black box to replace the sub-circuit and connect it to the main drawing. If you have some examples please post it or PM me.
challenger said:After smashing parts all part names and values have a crosshair applied to them. This looks very messy. How do I turn off all those cross hairs?
Can you tell me what the major difference is between veresion 4.03 and ver 4.09r2.
Thanx
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?