hii all
i did every think to get my desired output (12V) but i couldn't i hv tried changed MOSFET and rectifier diode many times but i still didnt get my output...where is the wrong here???
Check some of your component values to make sure that you are indeed using the correct values.
For example, you have C3=0.01F, most spice simulators will interpret this is 0.01 femto, where fempo is \[10^{-15}\], so in your case you might have a capacitor that is \[10^{-17}\] Farads. Also your inductor value for L7=1pH, this is \[10^{-12}\] Henries. Double check these values.
hii all
i did every think to get my desired output (12V) but i couldn't i hv tried changed MOSFET and rectifier diode many times but i still didnt get my output...where is the wrong here???
I don't see a polarity marking at the transformer. The waveform suggests forward instead of the intended flyback operation. But you'll see when monitoring the secondary voltage.
thnx ch wazir ya it helped, seeing my desired output for the first is sumthin great..lol..thanx aloot man.. but actually i still ddnt got my waveforms...dont know why??!!!
iam using multisim dear vamsi57