Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to save & open simulation output in Synopsys VCS

Status
Not open for further replies.
S

sagar_eda

Junior Member level 1
Joined
Jan 15, 2010
Messages
15
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
chirala
Activity points
1,390
i am working in VCS for my project. i need to check simulation output for many modules. suppose if i am simulating module2 and if i want to check simulation output for module1 (which was previously simulated), currently i am simulating module1 again and seeing result. this is definitely waste of time. so please help me how to save & open simulation output waveforms without running again and again.

if u are familiar with quartus II, there we have vwf(through this we apply our inputs) and cvwf(we save simulation output in this format to verify in future without resimulating again) files. is it possible similar type in VCS also.

please help me
thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top