Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to rout a net with shield in pads?

Status
Not open for further replies.
E

edaboardman

Junior Member level 3
Junior Member level 3
Joined
May 28, 2005
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,490
how to rout a net with shield in pads?
I had failed in powerpcb and blaze,ver 2005sp2,no way.
 

Hi,

Routing along with shielding net is not that easy in any of the pcb design tool,the best way to do that is to select the net along with the shielding net(assume gnd) and start routing like you do for address bus/data us routing.

Folks out here with any other suggestions are welcome.Hope this will help you.


Regards

Ramesh
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top