Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to disconnect power pins on multiple opamps in Eagle

Status
Not open for further replies.
B

beaka

Newbie level 3
Joined
Jul 24, 2009
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Australia
Activity points
1,308
When I put in more than 1 opamp the power pins are connected and in most cases that is fine. In my current circuit I am implementing a linear optocoupler (HCNR200) to isolate HV from LV circuits and I want the opamps on different supplies.

I cant find a way to disconnect the power pins. It is not critical as I am able to disregard the non-routed wire but I am interested in how others might handle this issue.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top