rajsrikanth
Full Member level 2
hi
we have WIZnet ethernet module. This ethernet should be configured from FPGA. and in that already protocol and physical media is developed .
so i need to configure the device by setting the registers.
i could not able to configure becasue iam confused how to set the registers.
can any one give some idea on configuring the device using verilog.
predefined address(14bit ) are given and data pins(8) are given.
i want to know how we can configure using address and if we configure then how to retrieve the register values when receiving the data.
please kindly help on this.
regards
raj
we have WIZnet ethernet module. This ethernet should be configured from FPGA. and in that already protocol and physical media is developed .
so i need to configure the device by setting the registers.
i could not able to configure becasue iam confused how to set the registers.
can any one give some idea on configuring the device using verilog.
predefined address(14bit ) are given and data pins(8) are given.
i want to know how we can configure using address and if we configure then how to retrieve the register values when receiving the data.
please kindly help on this.
regards
raj