Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to change ALL the tracks in Eagle

Status
Not open for further replies.

daviddlc

Full Member level 5
Full Member level 5
Joined
Feb 11, 2007
Messages
260
Helped
35
Reputation
70
Reaction score
9
Trophy points
1,298
Location
USA
Activity points
2,709
I need to change ALL the tracks to a specific size in Eagle

How to do this ?

Thanks.
 

We can type change width and then width required in CLI window then press enter.
Like: change width 0.016
After this you can change the width of track by clicking it.

If you know other more efficient way than say.
 

daviddlc said:
I need to change ALL the tracks to a specific size in Eagle

How to do this ?

Thanks.

Edit->group, then select the whole board.
Edit-Change->Width. Then right-click on the board. In 4.x you're ready, in 5.x you must select Change:group from the menu that appears.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top